Posts Tagged ‘E-Turbax’

Starting Off 2012 Right with a Successful Maiden Flight

January 2, 2012

N-Tech Jets is working to bring out several jets for 2012. One of those jets is the Hawk. We test flew a sample today using electric power. As you may have seen in my previous post about this plane, Larry Wolfe at Jet Hangar Hobbies helped out by building the prototype sample. He installed his E-Turbax Fan with custom Neu Motor controlled by a brand new Ice 2 160HV Castle Creations ESC. Battery is 6500mAh 12S Li-PO. Radio is SD-10G. Retracts are N-Tech Jets retracts and struts and control system designed for the Hawk.

Larry brought it out to PVMAC today, Jan 1, 2012, for it’s first flight. And what a GREAT flight! Take off was perfect, flight performance looked GREAT, and landing was SMOOTH!

The Hawk will be available 2nd Quarter 2012 from Hobby People and N-Tech Jets Dealers. It’s an awesome 68″ wing span, 21 pound, 120mm EDF high performance model. What a GREAT flyhing airplane!

The N-Tech Jets Hawk is a winner. I’m looking forward to a hundred more successful flights!

Thank you to Jet Hanger, Larry Wolfe, and Tim Johnson for all their help!

A perfect way to start off 2012!

Mike

Advertisements

Sneak Peak at a new N-Tech Jets Model

December 23, 2011

It’s a prototype Hawk. Retracts and struts are included and installed. This one will be flown first with a JHH fan and then will be flown with some top secret Larry-Special fan equipment. More to come soon. Enjoy the pics!

N-Tech Jets Panther – 72″ Wingspan

November 22, 2011

N-Tech Jets Panther F9F

 

This is a new Jet. We expect them in stock in 2-3 weeks.  See specs and info below. This is some rough information about this very nice, great flying high performance EDF.  It includes the retracts, air system, and struts. Power system and radio are required, sold separately of course.

N-Tech Jets

Panther F9F

EDF ARF R/C Jet

Item No 190150

Mfg No. NTJ-01

 

Wingspan: 1829mm – 72in

Length: 1800mm – 70.85in

Flying Weight: – 18-21 lb

Fan Size: 120mm

Power System: 12S

Functions: A/E/T/R/F/G

Optional Brakes

 

Features List:

Wood Wing and Stabilizer Construction

Molded Fuselage with Wood Structure (ABS Skins with Plywood and Carbon structure)

Factory Covered Flying Surfaces and Painted Fuselage

Complete Hardware Pack

Removable Wings

Functional Nose Gear Doors

Basic Molded Cockpit

Mounting and Ducting Optimized for Electric Power

 

Recommended Items:

9-10 Channel Computer Radio (We used the SD-10G)

8 Servos

120mm Fan

EDF Motor

12S Li-Po Battery (5000 to 6000 mAh)

160amp ESC

Air Pump for Retracts

 

Big High Performance Electric Jet

 

Step up from foam and micro jets! Experience high performance electric jet performance with a model that is big, forgiving and fast. The Panther has exceptional qualities in flight, is stable on approach, and is not pitch sensitive with extended flaps. At speeds of over 120mph, the Panther is fast and fun with a performance envelope almost any experienced R/C pilot will enjoy. Good looking and great flying, the N-Tech Jets Panther is a stunning aircraft that is a joy to fly.

 

Pictures for Box:

Main 3/4 shot

Smaller Detail Shots:

1. Flaps

2. Canopy

3. Retracts

 

Next info is for instructions:

 

Items Used to Complete our Panther

 

Radio:

We recommend an 8-10 channel radio for convenience although technically the Panther only has 6 functions: Ailerons, Rudder, Elevator, Flaps, Throttle, and Retracts.

 

Qty 7 94851 Metal Gear Servos (or similar)

Qty 1 94722 Standard Servo (or similar)

qty 2 750mm Extensions (for tail servos)

qty 4 500mm Extensions (from wing joint to receiver)

qty 2 300mm Extensions (from Ail servos to wing joint)

qty 1 100mm Extension (from steering servo to receiver)

(If your radio is only 6-8 channel, you’ll need QTY 3 Y-harnesses for the Aileron and Flaps and Steering/rudder servos).

Servo Lead retainers (Heat shrink, molded clips, whatever is your preference

Receiver Battery: We recommend either a 5 cell Ni-MH pack of 1600 or more mAh rating, or a Li-FE 6.6v receiver battery with 1600mAh or more rating.

 

Power System:

-120mm Fan

-12S Motor

(We used the Neu Motor for the E-Turbax fan although other motor/fan systems of this size and rating will work)

-Castle 160HV (The power system does not draw this much current but EDF systems tend to be very demanding of the ESC, thus we use an ESC rated a little higher than necessary)

-12S 5000 to 6500mAh LiPO packs, minimum 40C rating (The airplane is setup for using two separate 6S packs sometimes called Saddle Packs)

-6mm Gold Connectors or similar (Castle 6.5mm connectors for example)

-Mounting Screws for the Fan Unit (different fans may have different requirements, we used #4 x 3/4 Dubro Socket Head Wood Screws for mounting the E-Turbax Fan)

 

Other Items:

-The fuselage can be broken down into two parts, so we installed air-line connectors at the fuselage break, it required 3. Robart, Jet Hangar Hobbies, or other similar air-line connectors will work.

-Glues: We used Wood Glue, Epoxy, and C/A (instant glue)

-Threadlock, (blue or semi-permanent, do NOT use “red” or permanent thread lock)

-Tape: Gaffer’s Tape or bi-directional Packing Tape will work. This is to seal off the air between duct joints and around the motor wires where they exit the exhaust air duct.

-Basic tools (file, wire cutter, pliers, hobby knife, various metric hex-drivers, small drill bits, drill, etc)

-Paint to detail the cockpit (Optional)

-Small amont of fiberglass cloth (3/4 to 1 oz weight)